PCI Express x8 Copper Double Port 10g optical Network Card PCI Express fiber optic network 10Gps CHIPSET:INTEL 82599ES

FOB Reference Price:Get Latest Price
$85.00 - $90.00 / Set | 20 Set/Sets (Min. Order)
Lead Time:
Quantity(Sets) 1 - 1000 >1000
Est. Time(days) 14 Negotiable
Customized logo (Min. Order: 200 Sets)
Customized packaging (Min. Order: 1000 Sets)


Graphic customization (Min. Order: 1000 Sets) Less
Report Suspicious Activity
Quick Details
Products Status:
Transmission Rate:
Interface Type:
PCI Express
Brand Name:
Model Number:
INTEL 82599ES Lan card
Place of Origin:
Guangdong, China
Support Computer Systems:
check below
Supply Ability
Supply Ability:
1000 Set/Sets per Week
Packaging & Delivery
Packaging Details
Neutral english box
Lead Time :
Quantity(Sets) 1 - 1000 >1000
Est. Time(days) 14 To be negotiated
 PCIe x8 Intel82599ES Dual 10GbE fiber network card

PCIe X8 Gigabit SFP Network card, Adopt Intel ®JL82599ES  chipset solutions. An adapter specifically designed to set up remote links to a file server or remote workstation. Compatible with multimode gigabit 1000SX transceivers for fiber optic connections of up to 500 meters, or single-mode gigabit 1000LX/WDM transceivers for long fiber optic connections (km).

  • PCIe host interface specification v2.0 with 5GT/s Bus width
  • Complies with PCI Bus Power Management Interface Specification Rev1.2
  • Complies with the IEEE802.3ab ,IEEE802.3u and IEEE802.3 specifications
  • Half duplex at 10/100Mbp operation and full duplex operation at all supported speeds
  • Layer 2 functions: IEEE 802.3x Flow Control - IEEE 802.1q VLAN
  • Supports Receive-side scaling (RSS)
  • Supports IPv 4, IPv 6 protocols
  • Supports Jumbo Frames up to 9.5K
  • Supports UDP. TCP and IP Checksum offloading
  • Statistics for management and RMON
  • Support for virtual machines device queues
  • Next Generation VMDq Support (8VMs)



Suitable networkSFP+
Transmission rate10000Mbps
Bus typePCIe X8
Transport interface2 x SFP LC Port
Master chipsetintel JL82599ES
Functional featuresIPMI pass-through via SMBus or NC-SI, WoL, PXE remote boot, ISCSI boot, VLAN filtering
Web standardsIEEE 802.1p,IEEE 802.1Q,IEEE 802.2,IEEE 802.3ac,IEEE 802.3az,IEEE 802.3x
IEEE 802.3z,IEEE 802.3ad
Boot romYes, Full duplex / Half duplex adaptive
LED indicator4 x Link /ACT LED
Metal BracketLong / short bezel iron sheet
Drive supportWin 7 / Win 8 / Win 10 / Vista / Sever 2008 / Sever 2012 / Linux / DOS
Applicable fieldsDesktops, Servers, Workstations

System Requirements

  • Win 7/ Server 2012/ Server 2008/ Win 8/ Win 8.1/ Server 2016/ Win 10, FreeBSD, Linux , VMWare ESXi
  • One available PCIe X8 slot

Cabling Requirements.

Intel 10Gigabit adapters

* SFP+ Module Laser wavelength:850 nanometer (not visible)

* LC Cable type:

   Multi-mode fiber with 50 micron core diameter, maximum length is 550 meters

   Multi-mode fiber with 62.5 micron core diameter, maximum length is 275 meters

  Connector type: LC

* SFP+ Module laser wavelength:1310 nanometer(not visible)

* LC Cable type:

   Multi-mode fiber with 9 micron core diameter, maximum length is 3K meters

* 10 Gigabit Ethernet over SFP+ Direct Attached cable(Twinaxial)

   Length 10 meters max.


Hardware installation.

* Turn off the computer and unplug the power cord

* Remove the computer cover and the adapter slot cover from the slot that matches your adapter

* Insert the adapter edge connector into the slot and secure the bracket to the chassis

* Replace the computer cover ,then plug in the power cord

* Power on the computer

Note: select the correct slot, some systems have physical X8 PCI Express slots that actually only support lower speeds. Please check your system manual to identify the slot

Install Drivers and software

Windows Operating Systems

You must have administrative rights to the operating system to install the drivers.

* insert the CD driver bound with Intel network driver into your CD-ROM drive(also you can download the latest drivers from support website.

* if the Found New Hardware Wizard screen is displayed, click Cancel.

* start the autorun located in the software package, the autorun may automatically start after you have extracted files.

* Click install Drivers and Software.

* Follow the instructions in the install wizard to finish it.


Installing Linux Drivers from Source Code

* Download and expand the base driver tar file

* Compile the driver module

* Install the module using the modprobe command

* Assign an IP address using the ifconfig command